Blog

How do you fix pressure spots on an LCD Screen? Two Simple Methods

How do you fix pressure spots on an LCD Screen? Two Simple Methods

LCD displays have made viewing easier. They produce smoother images that are more soothing for the eyes. Modern LCDs have thinner bezels than traditional screens. This makes them more vulnerable to pressure from outside.

A pressure spot can form if an LCD screen is accidentally placed under too much pressure. This can cause problems in your workflow as the affected area might not show up. It is worthwhile to try and fix it as the expense of replacing the LCD can be quite expensive.

You’ve probably wondered how to remove pressure spots from an LCD monitor before.

This article will show you how to save money by walking through each step.

How to fix pressure spots on an LCD screen

The effect is that an LCD screen becomes blurrier if it’s put under more pressure. These areas can be white, red, or blue.

Perhaps you are wondering whether pressure marks can be fixed. It would be difficult to repair all types of pressure spots. However, some are possible.

Let’s take a closer look at some strategies that can be used for certain types of spots.

1. This is the best way to fix a white spot on your LCD screen

A reflector panel or lens that is positioned on an LCD screen can often cause white spots. LCD TV screen screens are especially susceptible to this problem. They are located opposite the backlight of the LED and serve to diffuse the light from the LCD. They can often fall off due to overheating. The white spots will appear when this happens.

These steps will fix it:

Step 1: Prepare Your Device for the Fix

Turning off TV

1. Turn off the TV.

2. Remove the main power supply.

3. It is time to unscrew it.

4. Place the screen on a protective, soft surface.

Step 2: Unlock it

1. Take out all screws from the exterior and do not touch internal parts.

2. Remove the back panel from the TV.

Step 3: Take out the screws

Remove TV Screws

1. All inner screws must be removed. It can be hard to recall where each screw is located so it’s a good idea to arrange them carefully or make notes.

2. To expose the speakers, remove the plastic covering.

Step 4: Carefully remove the TV speaker

1. Gently jiggle the speakers until they are loose.

2. Then, unplug the speaker wires from the circuit board and remove them.

3. The ribbon cable should be unplugged from the circuit board.

Step 5: Discard the protective case of the panel

1. To remove the protective metal cover, use a flathead screwdriver.

2. Be sure to remove the stopper at the bottom.

Step 6: Take the white sheet off the TV Panel

Remove the White Sheet from the TV Panel

1. Gently raise the TV’s screen to its side.

2. You should not take out the frame around the edge and front of your TV.

3. Reposition the TV so that it faces down.

4. Take the TV’s back and remove it from the screen.

5. Remove the display panel/screen.

6. The plastic frame should be removed. The plastic frame is delicate so be gentle.

7. Remove the plastic frame so that white sheets may be taken off.

Step 7: Use glue to attach all the loose lenses to the lights

1. Lift the sheets of white to reveal the circular plastic lenses. This is the last bit we have to do –

2. We can now do the actual work by removing the white sheets.

3. Take out any plastic lenses that are loose (probably all).

4. Apply glue to the bottom of each lens’ three feet.

5. Each lens should be reinserted into its original location.

6. Give the glue time to dry. It may take up to several hours in some instances.

8. Put everything back together.

Put Everything Back in TV

1. Make sure all lenses have been firmly fixed and that the glue is cured.

2. Reassemble everything in the reverse order you removed it.

Set up your TV exactly as before and turn it on. You should now be rid of the white areas.

This process can take some time so make sure you are available to do it when possible. The same process will also be applied to a laptop’s screen.

2. Apply this method if you have a black spot on your LCD screen

Black Spot on Your LCD Screen

Black-colored pressure spots were created by dead pixels that are not able to display colors. Although it’s impossible to repair such spots on an LCD monitor, you can place them in the corners of the screen.

Use a piece of rubber or cloth to rub the area. Continue to rub the black spot until you are satisfied with its position. Once you’ve positioned the display to one side, cover it with white paper. This will help reduce eye strain and make it easier to use the display.

Imagine your black spots appearing in a circle. You will need to create a circle that is equal in size to the spot. Attach the transparent tape to the top of the spot.

You will hopefully be able follow this process and bring out your dark spots.

How do you fix pressure spots on your LCD screen?

Pressure spots can only be repaired in certain cases. Your display could be severely damaged if you do not choose the right process.

Examine your screen to see if it has a warranty

First check that the warranty on your device has not expired if you notice a pressure spot in your phone, tablet, or TV screen. It is possible to determine if the warranty covers the part that you are seeing. Do not attempt to repair the issue yourself if your warranty does not expire. Your warranty will be voided in many instances if you remove the screw or open the casing. If your warranty has ended, you should only attempt to repair the LCD’s pressure spots; otherwise contact your manufacturer for free service.

You can increase the number of dead pixels, but don’t overdo it when there is a black spot

Do not rub too hard on a display with a pressure spot. Over-rubbing can cause the black spots to spread and eventually your monitor may be permanently damaged. You can instead gently rub the area and move it into a corner. It is safe to touch the LCD once it has been removed. If the LCD is not able to be used, replace it.

You should call your expert friend

It is a good idea to get help from a friend if you’re not tech-savvy or aren’t familiar with fixing technical gadgets. You can’t make it right the first time. Feel free to reach out to a friend who’s passionate about technology.

You can also call an electrician or shop if that’s not an option.

What can you do to prevent pressure marks on your LCD screen?

It is better to avoid pressure spots developing and prevent them from happening. These are good practices and habits that can prevent damage to your LCD screen.

Securely store your monitor

Advantages of a Regular Monitor

It doesn’t matter if you own an LCD TV or laptop monitor. Children and pets can accidentally throw things at LCDs, causing permanent damage. Make sure that your LCD is placed in an area where it is unlikely to become physically damaged.

Always be gentle when touching the screen

Be careful when cleaning your LCD panel. Use a soft, clean cloth. It will be damaged if you apply too much pressure to the panel. You can clean your LCD panel with a soft cloth. This will prevent it from cracking.

Make sure to use a screen protector

A screen protector is a good idea to protect your display against any unintentional damage. It reduces the risk of it being damaged or broken, as well as the hassle involved in cleaning and setting up. It is easy to find screen protectors for TVs, phones, or laptops.

Do not put heavy stuff on top of your LCD

You can place anything heavier on your LCD screen to prevent it from getting pressure spots. Even a book. Keep heavy objects away from your LCD display if you want it to last.

Always use the correct operating system settings for your TV, computer, or phone. The product’s longevity can be affected if you override any function. Pay attention to the display and graphics settings.

Most Frequently Asked Questions

We will try to answer some common questions about LCD pressure spots, and the associated issues.



Q. Q.

Black spots will appear on your screen if there are dead pixels. They may not be visible if there are only few. You will see a black area if there are many dead pixels. Spotting can be a problem with LCD monitors. You need to take care of dead pixels.



Q. Q. Can you remove pressure spots from my laptop screen?

The problem will determine the best solution. It is almost impossible to completely remove black pressure marks from your laptop screen if they are not covered by the display. If your TV or laptop screen has white pressure marks you may be able to repair them using glue. (See above.)

Last words

It happens, even though nobody wants it. . These strategies will help you fix any pressure spots on your LCD screen. They are well worth it if you have trouble with pressure spots.

We hope that one of these methods will work for you. Be sure to read all instructions before you try a new method. Also, avoid developing more pressure points.

Leave a Reply

Your email address will not be published. Required fields are marked *